Figure 1From: Industrial dry spinning processes: algorithmic for a two-phase fiber model in airflowsIndustrial dry spinning setup for uni-axial fibers with take up of the produced fibers at the bottom side of the spinning duct. Left: Sketch of the dry spinning device and orientation of the outer basis \(\{\mathbf {a}_{1}, \mathbf {a}_{2}, \mathbf {a}_{3}\}\). Right: Sketch of the holes (marked withX) in the spinneret (not in scale). All proceeding simulation results are shown for the fiber extruded from the central position (greenX)Back to article page