Table 2 Kerf and Heat Affected Zone (HAZ) width after flame cutting on the top, middle and bottom of the plate for different velocities
From: Modelling and simulation of flame cutting for steel plates with solid phases and melting
Kerf width (mm) | HAZ width (mm) | |||
|---|---|---|---|---|
Top | Middle and bottom | Top | Middle and bottom | |
135 mm/min | 3.01 | 1.95 | 0.30 | 0.64 |
202.5 mm/min | 2.28 | 1.50 | 0.42 | 0.56 |
270 mm/min | 1.93 | 1.25 | 0.42 | 0.53 |